Call Search. New to Ham Radio?
repeater Duplexer needed for amateur
With the repeater activated, the transmitter output was sent to a Watt dummy load with a reduced level sampling port. Some folks run a "split" duplexer without the "T" fitting and cables or "T" cable , with one antenna connected to the transmit side of the duplexer, and a second antenna connected to the receive side or the receive antenna may be a one port from the multiport splitter on a community receive antenna. A lot of folks that I know actually tie-wrap a note to the tuning rods - and the note says in very strong, coarse and blunt language not to touch the tuning for any reason, and if necesary to contact someone's name - usually the head of the tech committe, or the system owner. This capacitor had failed, causing the set to be taken out of service.
Standardisation of repeater offsets
In a voted receiver, there are several satellite receivers set up to receive on the same frequency the one that the users transmit on. Thus, they must be operated under different rules than more conventional repeaters. Medical School or Games Industry? More info needed.